The MG-C27 was originally the Contessa 27, and as such she was designed by legendary yacht
designer Rob Humphreys. In 1985 the moulds and design of the Contessa 27 were purchased
by MG Yachts and thereafter sold as the MG-C27. They do, as you would expect, have the
capabilities and performance that has given Contessa their reputation.
"Calluna" is a tidy example of this popular cruiser/racer having been lovingly owned and cruised
by her current owners. There is work to be done to her as the owners are selling before
completing this years winter refit program and as such she is competitively priced and sensible
offers are encouraged.
MG 27 – 27ft x 10ft. Built 1988. Swing Keel – draft up 3ft – draft down 6ft.
Tiller plus tiller extension. Mainsail, Jib and genoa. Spinnaker pole. 2014 Sprayhood, dodgers,
cockpit tent, sailcover. Cockpit cushions re-covered 2019. 2 x horseshoe life rings, mooring
warps and fenders, CQR anchor chain and warp. All running and standing rigging serviced
2014. Guardrails replaced in 2019.
She has a semi-battened main, genoa, and a jib. She can be set up for self-tacking with the jib.
Single cylinder Volvo Penta 12HP diesel inboard 2001 regularly serviced with access under
removable companionway step. Battery on/off switch and key above step.
Two Burner Hob with oven and grill. Gas serviced 2014. Two gas cylinders fitted in cockpit.
Plumbed sink and large cool box storage, galley cupboards above oven and below sink.
Huge port quarter Berth with opening cockpit window, two batteries under berth. Storage locker
under outboard storage
Enclosed Heads with sink and ample storage, opening window.
Starboard side Lift top chart table with electrical switchboard - 5 draws under.
U-shaped saloon with sliding skylight window, two large tinted saloon side windows, fold up
table with mechanism for lifting keel – (hand operated with winch handle.) Room to sleep on
both Port and Starboard cushions. Port and Starboard outboard storage shelves including
All saloon and berth cushions re-upholstered 2014
Forward double V berth with sail storage under and outboard storage lockers port and starboard
Some Works required
Electronics require updating (last done in 2011),
radio needs fixing
anchor chain need replacing
Inflatable dinghy needs substantial work on its transom.
New bilge pump on board to fit
Foam backed fabric hull lining has been removed to stop it holding condensation. The paint
product to coat the interior with is on board ready to recoat.
ModelC27 Lift Keel
Mooring CountryUnited Kingdom
SaleOn behalf of customer
Trade in possibleyes
Length8.36 m/27 ft
Width3.05 m/10 ft
Draft1.7 m/6 ft
No. of engines1
No. of berths6
WC & bathrooms1
Rig Sails Equipment
Interior Cabin Layout